Kenosha Reuse Discussion Board > ZION, IL
> Commercial
> Mechanical
> Used
> Plus Warranty
> 3 way divider / splitter 1/2" in x 3/8" out inc. clips
3 way divider / splitter 1/2" in x 3/8" out inc. clips
3 Way John Guest Divider/Splitter
1/2" x 3/8" reducer available on request to make a 3/8" X 3/8" Divider
(add 1.00 when purchased with Divider)
It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting. For soft or thin walled plastic tubing we recommend the use of a tube insert.
Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the "O" ring provides a permanent leak proof seal.
Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.
Push in Collet and remove tube
To disconnect, ensure the system is depressurized before removing fitting.
Push in collet squarely against face of fitting. With the Collet held in this position, the tube can be removed. The fitting can
