Kenosha Reuse Discussion Board > ZION, IL
> Commercial
> Electrical
> New
> New solar pow welding helmet pair gaunlets tig mig arc
New solar pow welding helmet pair gaunlets tig mig arc
Solar Powered Professional Quality Auto Darkening Welding Helmet ARC MIG TIG with Welding Gloves Gaunlets - NEW
This auto darkening helmet is your essential tool when it comes to ARC,MIG and TIG welding.
The welding helmet is delivered ready for use. For your protection and to ensure that your LCD VISION auto darkening welding helmet functions properly, read these instructions carefully and consult with a qualified instructor prior to operation. Before Welding
Check whether the front cover lens and the front frame are inserted and fixed in place. Use the correct level of protection for your welding process. Please refer to the following chart to help your choice. Preperations for Use
The LCD VISION auto-darkening welding helmet switches light to dark state when a welding arc is struck. The auto-darkening welding helmet switches back to the light state when the arc stops. Safe Practice
The auto-darkening welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas. However, it is not recommended to use this type of filter when the arc is glimmer or just incandescent. In this case, it is necessary to do a try out before use. Standard protective plates must be installed on both the inside and the outside surfaces of the filter. Failure to use protective plates may constitute a safety hazard or result in irreparable damage to the filter. Maintenance
Carefully inspect the LCD VISION auto-darkening welding helmet. Cracked, pitted or scratched filter glass or cover plate reduces vision and seriously reduces the level of protection. Such damaged components must be replaced immediately to avoid risk of serious eye and face injuries. Clean the lens with a lint free tissue. Do not use solvent. Warnings
Use the auto-darkening welding helmet only for eye and face protection against harmful ultra violet and infra-red radiation , sparks and spatter from welding. Protective plates are fragile. This product will not protect you against serious impact hazards such as,fragments of grinding .wheels or abrasive discs, stones ,or other grinding tools,explosive devices or corrosive liquids ETC,. Appropriate protection must be used where these hazards exist. Do not use any tools or other sharp objects to remove any components of filter or helmet. Doing so may damage filter or helmet preventing proper function possibly causing injury or cancellation of the warranty. Specifications Use with ARC, MIG and TIG welding
Extra large viewing lens Response time: 0.0001 Sec
Solar powered with backup lithium battery which can be used up to 4200hrs
UV and IR protection come into compliance with EN169 Dark Shade #16.
Full face coverage with ratcheting headband
Automatic On/Off switch with adjustable delay time
'Worth every penny. Exactly as your picture. Perfect welding helmet. Perfect size. Thanks a million. Bobby.
