Kenosha Reuse Discussion Board > ZION, IL
> Commercial
> Automative
> Used
> Plus Warranty
> Duniway stockroom ion pump control unit ipc-E062
Duniway stockroom ion pump control unit ipc-E062
Duniway Stockroom Ion Pump Control Unit IPC-E062
Duniway Stockroom Ion Pump Control Unit IPC-E062
* Input Parameters: Voltage 115/230 VAC
* Internal Voltage Selection
* Current: 10 Amps maximum in START mode (115VAC)
* 5 Amps maximum in START mode (230VAC)
* Open Circuit Voltage +/-5200 +/- 10% VDC or +/-3300 +/- 10% VDC
* Internal taps for voltage change, and polarity select on the rear panel
* Short Circuit Current for 60 Hz operation: +/-200 mA +/- 10% or +/-120 mA +/- 10%
for 50 Hz operation: +/-167 mA +/- 10% or +/-100 mA +/- 10%
* Overload Protection Fuse for line power. Power automatically turned off if pressure is greater than about 0.5 mTorr AND the START/PROTECT switch is in the protect position.
* Shutoff Currents +/-65 mA +- 20% in the 8, 20 or 30 liter per second positions, or: +/- 108 mA +/- 20% in the 60 liter per second position
* Metering 20 microAmp +/- 2% taut band meter Current Scales 200 mA to 20 microA, +/- 10% in 5 scale positions
* Pressure Scale Modified log scale, 10-4 to 10-8 Torr,matched to switch-selected pump
