Kenosha Reuse Discussion Board > WAUKEEGAN, IL
> Commercial
> Mechanical
> Unt 520DX plasma cutter 200A tig arc mma welder
Unt 520DX plasma cutter 200A tig arc mma welder
Brand New SIMADRE UNT CT-520DX WELDER - simadrestore.com
WITH HIGH-PERFORMANCE SG-55 60A TORCH !!
BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES - 25 60A CONS!
THREE MACHINES INTEGRATED IN ONE
SIMADRE PORTABLE 200 AMP TIG, 200 AMP ARC/MMA and 50 AMP PLAS MA CUTTER !!!
* SG-55 High Performance Cutting Torch
* Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.)
* Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm.
* Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span. See Picture Below !
* Advanced inverter technology means high cutting and welding performance.
* The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service
* Plasma Cutter is 3/4" rated with 1" severance cuts
* Tig Welder has a 5/16" weld thickness and a high frequency non-contact start.
* Arc/MMA Welder has a 3/16" weld thickness
* CE, CCC, CSA and ISO-9001 certification
TIG: 15-200 MMA: 15-200 CUT: 20-50
* Plasma cutting torch with 16.5 ft (5m) hose.
* Tig Welding Torch with 11 ft hose (with long and short caps)
* Ground cable (9 ft) with clamp.
* You shall provide 60~70 psi air supply, 110vac or 220vac power plug for plasma cutting
* You shall provide argon tank for tig welding
Please check our warranty policy in section 5.
