Kenosha Reuse Discussion Board > WAUKEEGAN, IL
> Commercial
> Industrial
> Refurbished
> Plus Warranty
> Hygain ham iv rotor rotator and control great condition
Hygain ham iv rotor rotator and control great condition
This is a Ham IV rotator I purchased a few years ago from an estate. It was used very little and had been in storage for a while. I had the case glass beaded and primed with zinc chromate and then finished with a tough epoxy enamal. The interior was in excellent condition with the steel ring gear, brass motor pinion and steel brake. The ball bearings were replaced even though the original balls were in good shape. The eight wire terminal was replaced with a pigtail which is terminated with an Amp connector. All hardware is new with stainless U-bolts. Numbers on the bottom of the rotor are: H IV S1 JUL 92
The control box was upgraded with a break delay and modified to accept an eight pin Jones connector. LED function lights were added. Included will be a short test cable. No rotor wire is included so you will have to have your own rotor cable and use the connectors on the test cable. A copy of the Owners manual will be included.
These retail for $649.95 at MFJ.
