Kenosha Reuse Discussion Board   >   WAUKEEGAN, IL   >   Commercial   >   Industrial   >   4" dia. 3HP grit by fein gxc belt grinding & polishing

4" dia. 3HP grit by fein gxc belt grinding & polishing


4" Dia. 3HP Grit by Fein GXC Belt Grinding & Polishing
4" Dia. 3HP Motor Grit by Fein GXC Belt Grinding & Polishing Attachment CENTERLESS GRINDER, Works wi
GRIT model GXC Centerless Grinding Attachment
for Polishing and Grinding Pipe & Tubing
The GXC belt-type centerless grinding module produces perfect
surfaces in the simplest manner. The conversion to a
Centerless cylindrical grinding machine is done in just a
few steps. Efficiency and flexibility are apparent in the
Perfect surface quality and high process speeds on pipes and
shafts are easily accomplished with the GXC centreless
grinding module. Even commercially available fleece belts
can be used in connection with the GX 75 2H basic unit. The
advance speed can be infinitely variably adjusted for the
material, up to 2 metres per minute.
Various guide rails are included in the scope of delivery
that are tuned to the surface quality of the workpiece. The
guide rail made of brass is made for rough surfaces such as
corrosion, scale, etc., or for dry grinding. The nylon rail
is the perfect choice for surface polishing and sensitive
Can be used with the optional GXW Coolant System for wet grinding.
There are several arguments for wet grinding using the GXW
cooling lubricant module: The swarf is bonded immediately,
cooling extends the service life of the grinding belts, the
finishing results are noticeably improved and thanks to the
reduced heat development during grinding the corrosion risk
for stainless steel pipes is reduced. A closed circuit
ensures sparing consumption of the coolant.
GXC Capabilities and Capacities:
For grinding of pipes and shafts from 10-100 mm diameter.
High process speed at highest surface quality
Also suitable for wet-grinding in connection with the
Can also be combined with the GI programme (GI 75 / GI 75
2H). The adapter 6 99 02 187 00 0 is required for this.
1 connecting cable with CEE plug 16 A
Optional GXW Cooling lubricant module
Comes with 1 litre cooling lubricant emulsion
This Centerless Grinding Attachment requires a model
GX-75-2H Belt Grinder - It is our reference number
142709. It can be seen on our web site,



4