Kenosha Reuse Discussion Board > WAUKEEGAN, IL
> Commercial
> Electrical
> 2009 john deere HX15 rotary cutter 15 ft width
2009 john deere HX15 rotary cutter 15 ft width
2009 JOHN DEERE HX15 ROTARY CUTTER 15 FT WIDTH
A flex-wing rotary cutter is the best way to go when dealing with large areas and uneven terrain. Get a lot done on the job and then fold up the wings for easy transport. Choices include 540 or 1000 PTO rpm, laminated or severe duty ag tires, and round stump jumper or bar type blade holder. With its 15-ft. cut width, the HX15 is the smallest width heavy-duty, flex-wing rotary cutter. A tractor with a minimum of 55 PTO horsepower is required. The type and volume of material being cut will affect horsepower requirements.
1 to 16 (25 to 406) for clearance over terraces
Cutting Capacity (diameter), in. (mm)
Cutting Chamber Depth, in. (mm)
Static Vert Drawbar Load Rating, lb.(kg)
Pull-type, with standard self-leveling hitch clevis (Pull-Type has standard 10,000 lb Safety Tow Chain)
22.5 (570) for tight turn capability
Hydraulically operated; stays vertical while raising/lowering (optional manual jackstand kit available)
Easy-clean, dome-shaped top deck
Double-decker design; superior strength
Deck Thickness, in. (gauge) (mm)
Intermittent cast steel segments - greaseable; single 1-in. diameter full-length hinge pin
CV ASAE Category 5 tubular telescoping star profiles
ASAE Category 4 tubular telescoping star profiles
No-seize, self-adjusting slip clutches
250 hp (186 kW) continuous / 300 hp (224 kW) peak
120 hp (89.5 kW) continuous / 150 hp (112 kW) peak
.5 (13) (Single suction) / .5 (13) (Dual suction-upper) - .5 (13) (Dual suction-lower)
4 (102) (Single suction) / 3 (76.2) (Dual suction-upper) - 4 (102) (Dual suction-lower)
Blade Tip Speed, ft./min. (m/s)
Wing - 15,586 (79.2) / 177 mph; Center - 15,728 (79.9) / 179 mph
Wing - 15,837 (80.5) / 180 mph; Center - 15,256 (77.5) / 173.4 mph
Smooth, obstruction-free Max Flow cutting chamber for a clean cut and no windrows
Bar Type (Dual suction) or Round Stumpjumper (Single suction) for protection of blades and carrier against obstruction damage
Standard, includes spring-assist unfolding
4-bolt 21x5.25x9.0 Laminated Tires
4-bolt 21x7x12 16 PR Severe-Duty Ag Tires
Spring suspension (4x8-in. coil spring) on all 4 wheel standards
Easy-adjust turnbuckle with bearing
