Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Mechanical
> Used
> No Warranty
> Silent knight 5820XL factory refurbished control board
Silent knight 5820XL factory refurbished control board
Up to 508 addressable points. NEW!
Supports Class A configuration for SLC (Style 6), SBUS, and Flexput circuits.
Distributed, intelligent power.
Built-in annunciator with 80-character LCD display.
RS-485 bus provides communication to system accessories.
Built-in RS-232 interface for programming via PC.
Built-in digital communicator.
Central station reporting by Point or by Zone. NEW!
Form C trouble relay rated at 2.5 amps at 24 VDC.
Two Form C programmable relays rated at 2.5 amps at 24VDC.
Uses standard wire - no shielded or twisted pair required.
The lntelliknight Model 5820XL control panel has one built-in Signalling Line Circuit (SLC) which supports 127 devices. Three additional loops can be added using the 5815XL SLC expanders to increase overall capacity to 508 devices.
The Model 5820XL's SLC loops support multiple device types:
Addressable photoelectric sensor
Addressable ionization sensor
Addressable Contact module
Addressable Relay output module
Addressable Notification Module
The following advanced sensor capabilities are available using the lntelliknight Model 5820XL:
Automatic drift compensation
Built-in sensor test to comply with NFPA 72 calibration testing requirements
The IntelliKnight Model 5820XL features a built-in UL listed digital communicator for remote reporting of system activity and system programming. The communicator has the ability to seize two telephone lines to report alarms and troubles to a monitoring facility. The communicator supervises two phone lines and will activate a trouble signal if a line failure is sustained for more than 45 seconds. Other communication features include: re-try if communication fails, two phone number capability, download phone number capability and touchtone or rotary dialing. The communicator is compatible with SIA, Ademco Contact ID. The format is selectable by account number.
The lntelliknight's built-in annunciator with 80 character LCD display and large easy to-use tactile touchpad can be used for system operation, programming and maintenance. It has five LEDs for alarm, supervisory, system trouble, system silenced and system power. System operations include silencing alarms and troubles, resetting alarms and the display of alarm troubles and memory. The system's non-volatile event history buffer stores 1,000 events for viewing from the built-in or remote annunciator. System operation can be initiated with a mechanical fire fighter's key or a valid 4- to 7-digit operators code.
* Primary AC: 120 VRMS at 50/60 Hz, 2.5A or 240 VRMS at 50/60 Hz, 1.4A
* Total Accessory Load: 6A @ 27.4 VDC, power-limited
* Flexput Circuits: Six programmable circuits which can be programmed individually as:
- Notification circuits: 3A @ 27.4 VDC per circuit, power-limited
- Auxiliary power circuits: 3A @ 27.4 VDC per circuit, power-limited
- Initiation Circuits: 100 mA @ 27.4 VDC per circuit, power limited
* Flush Mount Dimensions: 14.5 W x 24.75 H x 3.9 D (36.8 W x 62.9 H x 9.8 D cm )
* Overall Dimensions: 16.2 W x 26.4 H x 4.2 D (40.6 W x 67 H x 11.8 D cm)
* Battery Charging Capacity: 7.0-35 AH
* Battery Size: 18 AH max allowed in control panel cabinet. Larger capacity batteries can be housed in RBB accessory cabinet.
* Telephone Requirements: FCC Part 15 and Part 68 approved Type of Jack: RJ31X (two required) Model 5820XL
* this is the control circuit board only , no can
