Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Mechanical
> New fluke 771 milliamp process clamp meter F771 dmm
New fluke 771 milliamp process clamp meter F771 dmm
Fluke 771 Milliamp Process Clamp Meter NEW F771 DMM
Fluke 771 Milliamp Process Clamp Meter
Don t break the loop on 4-20 mA signal measurements.
Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.
* Measure mA signal for PLC and control system analog I/O
* Measure 4 to 20 mA output signals from transmitters without breaking the loop.
* Count on best in class accuracy of 0.2%
* Measure mA signals with 0.01 mA resolution
* Measure 4 to 20 mA output signals from transmitters without breaking the loop
* Resolution and sensitivity to 0.01 mA
* Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight
< 95% @ <30 C, < 75% @ 30 to 55 C
59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
1 meter drop test (except the jaw)
(2) AA 1.5 V Alkaline, IEC LR6, 20 hours typical
