Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Industrial
> Refurbished
> No Warranty
> Kenwood r-2000 hf receiver with vc-10 vhf converter
Kenwood r-2000 hf receiver with vc-10 vhf converter
Kenwood R-2000 HF Receiver with optional VC-10 VHF converter INSTALLED, in VERY nice shape with the Original manual, Original telescoping antenna, and AC power cord. Overall in VERY nice shape with a little mark on the top trim and some very light spotting on the top cabinet but looks Very good overall and works Excellently. The R-2000 tunes from 100 to 29999.9 kHz in five modes (AM, FM, USB, LSB, and CW) and from 108-174mhz with the INSTALLED VC-10 option. . The R-2000 presents the listener with three different tuning rates (and a frequency lock) plus convenient 1 MHz UP/DOWN buttons. A noise blanker, four position attenuator, AGC and all mode squelch are also included. The ten channel memory stores frequency and mode. The band-scan mode permits the R-2000 to scan between two user selected frequencies (at three rates!). The built-in seven digit fluorescent tube digital display indicates frequency to the nearest 100 Hz. With dimmer switch. The dual 24 hour quartz digital clock-timer can be used to activate the radio and an auxiliary device (recorder, etc.) for absentee DXing. The large front mounted speaker insures good fidelity. The rear panel has input for coaxial or hi-Z wire antennas. 120/220 VAC.
Frequency Range......150 - 30000 kHz, 108-174mhz
Power................100/120/220/240 VAC 50/60 Hz
Antenna Impedance....50 or 500 ohm
Selectivity (-6dB)...AM 6.0 kHz, SSB/CW 2.4 kHz, FM 15.0 kHz
Sensitivity..........0.4 V 2-30 MHz, SSB/CW (S+N/N=10dB)
Freq. Accuracy....... 10 x10-6 or better.
Intermediate Freqs...1st IF = 45.85 MHz, 2nd IF = 9.85 MHz, 3rd IF = 455 kHz
Audio Output.........1.5 Watts at 8 Ohms.
Dimensions...........14.8"Wx 4.5"H x 8.3"D
Weight...............12.1 Lbs. (5.5 kg)
