Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Automative
> Refurbished
> Wilkins 1 in. model 600 water pressure reducing valve
Wilkins 1 in. model 600 water pressure reducing valve
Wilkins 1 In. Model 600 Water Pressure Reducing Valve
* Wilkins 1 In. Model 600 Water Pressure Reducing Valve. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring frequent cleaning because of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.The valve has a standard pressure range of 25 to 75 psi.
* This product is used, but rest assured it works fine. It was removed shortly after installation when it was found that street pressure was at about 280psi and replaced with a different model that acommodated a greater reduction ratio. I cannot offfer a preformance warranty as a seller, but if it fails to work upon proper installation and you want to return I will refund original selling price upon its return.
* Inlet end is male threaded and includes a 1" NPT Coupling with bushing
* MANUFACTURERS PART NUMBER 1-600
* MAX WATER PRESSURE 300 psi
* See manufacturer's spec sheet on this product for full information.
