Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Mechanical
> Used
> No Warranty
> 18" griddle & 18" radiant broiler countertop combo unit
18" griddle & 18" radiant broiler countertop combo unit
ACityDiscount Restaurant Equipment: Comstock Castle 36" Counter Top Combo Unit 18" Griddle & 18" Radiant Broiler FHP36-18-1.5RB Full Line Of Comstock Castle Products Available - Manufacturer: Comstock Castle - Model: FHP36-18-1.5RB
ACDID106423 ACDMA859 ACDCA53216 ACDSEP ACDSP ACDTY9 ACDGC PeSAMember
Comstock Castle 36" Counter Top Combo Unit 18" Griddle & 18" Radiant Broiler FHP36-18-1.5RB
ITEM: Comstock Castle Counter Top Combination Unit
W/ 18" Radiant Broiler & 18" Griddle
* 36" wide gas counter top Char-Broiler and Griddle
* (1) 18"x21" broiler area, cast iron grates, sloped or flat, stainless radiants
* (1) 18"x21"x3/4" thick smooth griddle plate
* Stainless splash guards on 3 sides
* Dimensions: 10.75" H x 36" W x 28" D
* CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel finish, welded with angle iron and aluminized inner framing. Sturdy 4" heavy duty stainless pipe legs with adjustable feet. 4" wide stainless steel bull nose landing across the front is a functional work area for service plates and work utensils as well as control protection. Double wall construction with heavy insulation for cooler operation. Installation clearances for non-combustible surfaces are 0" on the sides and 4" in the rear. Char-broilers are approved for use in non-combustible locations only.
* BURNERS: Char-broiler and griddles have long life cast iron "H" pattern burners, evenly spaced, one for each 12" increment, for even heating. Char-broilers are rated at 25,000 BTU and griddles are rated at 20,000 BTU.
* CHAR-GRATES: Cast iron top grate sections measure 20.5" deep, designed with cast-in grease trough on each blade to allow grease run off into the front cold zone grease trough and reduces flare up. Each section is reversible for sloped or level grilling. Stainless steel splash guards on 3 sides graduating up to 4" high. Grease drain slot is 3.5" x 1" and feeds into a large, removable grease drawer.
