Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Mechanical
> New
> Plus Warranty
> Mille x-treme 8 vs wire feeder & bernard Q300 # 300093
Mille x-treme 8 vs wire feeder & bernard Q300 # 300093
New! Polyproplyene case with built-in slide rails and the ability to open the door to change wire with the feeder in a vertical position.
Digital meters with SunVision technology are standard for voltage and wire speed, and can also display amperage if desired. Meters can be seen clearly even in direct sunlight. On models with this option
Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
Improved contactor and overall duty cycle for high-amperage applications (425 A at 60%)
Trigger hold, wire jog, and gas purge are all standard and located on front panel. On models with this option
Wider voltage range for small and large wires with no contactor chatter or arc outages.
New! Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply. Best low-end CC arc in the industry.
* Flux Cored (FCAW) - (Gas and Self-Shielded).
* 14 - 48 VDC / 110 Max. OCV, Open Circuit or Arc Voltage
* 50 - 780 IPM (1.3 - 19.8 m/min) Actual range in CC mode is dependent on arc voltage.
* 12 in (305 mm), 45 lb (20.4 kg)
