Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Industrial
> Refurbished
> Clearance 20X-30X-50X toolmaker measuring microscope
Clearance 20X-30X-50X toolmaker measuring microscope
* This item is a high quality toolmaker s microscope used for measuring machined parts.
* It can measure diameters, lengths, and angles.
* We are discontinuing this product and slashing the price.
* Three Achromatic Objectives: 2x (8mm Field of View, 71mm Working Distance), 3x (5.3mm Field of View, 33mm Working Distance), 5x (3.2mm Field of View, 13mm Working Distance).
* Field of View: 8mm 5.3mm 3.2mm. Monocular Head, inclined 45 degrees. Magnification of 20x, 30x, and 50x with 10x eyepiece.
* With included 15x eyepiece, you get additional powers of 45x and 75. Measuring Stage: 125mm x 125mm on ball bearing guide to provide accurate and smooth stage stroke up to 25mm (Looks like 25mm, but manual says 30mm) in each direction.
* No gauge blocks included since micrometers travel the full range.
* Micrometer Heads: Quantity two, one for X and one for Y direction with 50mm (might be 25mm, but I think it was 50mm when I looked, anyway, stage will only go about 25mm) travel with least count 0.01mm.
* Focus: Both course and fine focusing knobs.
* Circular stage: Has 360 degrees vernier reading to 6 minutes (1 degree).
* Protractor head: Has degree markings in 5 degree increments and is rotatable.
* Sub-stage illuminator for transmitted light from bottom source.
* Provided by collimated green filter halogen bulb.
* Oblique illuminators, one on each side over the stage, with adjustable inclinations for surface illumination.
* Includes H15x eyepiece, with no crosshair.
* Includes WF10x eyepiece with adjustable focus, with built-in measuring reticle of 0-100mm graduations and 1.0mm resolution.
* Includes extra WF10x eyepiece with crosshair.
* Includes 90mm projection head (not shown in photos).
* Head is only used for viewing the profile when the base lighting is used. It will not work with the upper illumination.
* This head takes the projected image and displays on the screen.
* We had our editor to erase the illuminator from the images.
* There s actually a trinocular part not shown on the edited image that fits the projection head and you can insert a microscope camera there.
* Included aluminum storage case.
* Includes spare bulbs, dust cover, lens cleaning cloth, and instructions.
* Microscope manufacturing factory certified ISO: 9001 compliant.
* All optical lens are precision ground glass for premium optics and durability.
* Frame of microscope is sturdy and made of metal.
