Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Electrical
> CLASS10 huntair modular clean room cleanroom hepa
CLASS10 huntair modular clean room cleanroom hepa
This is a very nice system which retails for more than $500/square foot. If you need a class 10 or higher class clean room you will not find a better deal.
* 12,000 CFM each room or a minimum of 42 CFM per square foot
* New or wrapped up used HEPA filters modules for ceiling
* Decorative/protective panels for below the HEPA filters.
* Main fan is direct drive with digital control
* Cooling and Heating through the large radiator that can be connected to your water heater/chiller system. This system has 3 input and output pipes to the large radiator. The radiator is about 6 x6 note attached pictures. The cooling if you need it is connected by plumbing your chiller system to the radiator input and a return pipe back to your chiller.
* Precision fan balance these rooms are very quite considering the air flow.
* Dry Powder Coat Polyester finish
* Volumetric fan CFM gauge above one of the doors.
Here is a link to the main Huntair website.
http:// /main.htm
To get information on the roof system click on clean room ceiling systems then click on plenum button.
These systems were from a Semiconductor that closed its Portland facility.
If you have any additional questions we can be reached at (***)-341-1782 (Gary) or email me at
