Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Electrical
> 12 cans of superdope, anaerobic thread sealant, 750ML
12 cans of superdope, anaerobic thread sealant, 750ML
* 12 Cans of Super Dope Anaerobic Thread Sealant, 750ml each
* Chemically hardens in the absence of air into a tough, structural solid
* Permits disassembly, but when cured will not loosen, set or shrink
* Withstands temperature up to 400 F
VIRTUALLY IMPOSSSIBLE TO LEAK!
Super Dope Pipe Sealant is an easy to use pipeline sealant which sets fast to give an instant low pressure seal of 100 psi and a high pressure seal when fully cured. Unlike solvent based pipe dopes, ARGCO's SuperDope Instant Pipe Sealant cures anaerobically (in the absence of air), therefore, has no solvents leaking out of the sealant, leaving behind leak paths. Finally, it provides 100% sealing capability and does not shrink when curing.
Typical applications are in sealing of all types of metal threaded connections (up to 2 inches) against water, oil, grease, and most common materials conveyed by pipes. It is extensively used on pressure vessels, air compressors, hydraulic systems, tanks, fire sprinkler systems, etc. for positive vibration proof sealing.
Temperature range: -65 F to +400 F.
Volotile Organic Compounds: Minimal. 1.5% or less than 20 grams per liter.
Chemically hardens in the absence of air into a tough, structural solid.
Will not loosen, set or shrink
Only put on 1st, 2nd & 3rd threads ...uses less material
Allows for adjustment & alignment of fittings after application
Pipe joints and fittings are locked against vibration loosening
Withstands temperature up to 400 F
Seals regardless of a multitude of mistakes
*LOCTITE IS A REGISTERED TRADEMARK OF LOCTITE CORP. NEWINGTON, CT
0-10,000 psi; -65-400 F; 150,000 cPs, white color; 4 hour cure for pressure testing.
Typical applications are in sealing of all types of metal threaded connections (up to 2 inches) against water, potable water, gas, oil, grease, and most common materials conveyed by pipes.
It is extensively used on pressure vessels, air compressors, hydraulic systems, tanks, etc. for positive vibration proof sealing.
NOT SUITABLE FOR USE WITH OXYGEN OR CHLORINE.
Ensure parts are clean, dry and free from oil and grease.
Product is normally hand applied by brushing onto threads.
COMPATIBLE ACCELERATORS/PRIMER
Primers such as (Primer T) can be used. However, up to 30% strength loss can occur when using primers.
SUPERDOPE INSTANT PIPE SEALANT
Full Cure Time: . . . . . . . . . . . . . . 24 hours @ 68oF
Breakaway Torque ISO 10964: . . 3-7Nm (25-60 lb. in.)
Store in a cool area out of direct sunlight. Shelf Life: 12 months @ 68 F.
This Product is not recommended for use in: pure oxygen, oxygen rich
systems or for chlorine or other strong oxidizing material environments.
Normally not recommended for plastic. (particularly thermoplastic materials)
where stress cracking of the plastic could result.
Where cure speed is extended due to low temperatures or inactive surfaces, activator can be used. Best results are found if Instant Pipe Sealant is applied to 2nd or 3rd threadforms. Excess can be wiped away, any migration into lines will not solidify and can be flushed away during commissioning.
