Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Automative
> Used
> Atlas metal cold food drop-in unit |wcmd-3
Atlas metal cold food drop-in unit |wcmd-3
Atlas Metal Cold Food Drop-In Unit |WCMD-3
Cold Food Drop-In Unit Deep Design 3 Pan Size - 3.9 Amps 120V
o Accommodates your deepest pan or insert - 9-3/4" deep
Fully insulated for maximum efficiency and energy savings
Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
Utilizes standard 12" x 20" pans, or fractional size pans with the use of adapter bars
NSF certified - WCMD series is UL recognized
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 2" thick on
the bottom and enclosed with a 22 gauge galvanized steel outer lines. The entire unit is removable without the use of tools.
REFRIGERATION SYSTEM: (WCMD series only)
The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.
ELECTRICAL: (WCMD series only) The unit will be wired for 15 amps., 120 volt, single phase operation
with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided
Cold Food Drop-In Unit, self-contained refrigeration system, insulated pan, galvanized steel outer liner, with on/off thermostat switch and pilot light
