Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Automative
> Refurbished
> Welded shark tooth chain for walk behind trenchers
Welded shark tooth chain for walk behind trenchers
THIS CHAIN WILL FIT A TWO FOOT BOOM OR 26 STATIONS.
IT HAS A 4 3/4" WIDTH CUT WITH TWO TEETH ON THAT STATION.
This is a great price. I only have a few left.
These are the same chains that most dealers carrie.
note: to find the pitch of your chain go to the side of the chain. At the bottom will be two pins per side plate. Measure the two pins. If they measure 1.654" thats your pitch. If they measure 2inches then thats the pitch. ( I have chains for those as well)
To find your station count go back to the bottom of your chain. The pins on the bottom that are on each side plate are what you need. Count all the pins and divide by 2. This is your station count. Any chain you order you will need this info.
1. ASTEC TRENCHERS 2. DITCH WITCH 1030 3. DITCH WITCH 1230 4. DITCH WITCH 1330 5. DITCH WITCH 1820 6. DITCH WITCH 410SX 7. VERMEER 1150
8. VERMEER 1350 9. VERMEER 2050 10. VERMEER RT100 11. VERMEER RT200 12. BARRETO 1324 13. BARRETO 1624 14. BARRETO 1636 15. TORO DINGO
16. BOBCAT LT112 17. BOBCAT LT113
ANY CHAINS PURCHASED THRU THEDIGGINGGAL HAVE BEEN TESTED AND PASSED BEYOND STANDARD WEAR LIFE EXPECTATION. ALL CHAINS HAVE THICKER BUSHINGS UNDER THE ROLLERS FOR LONGER WEAR LIFE AND ALLOYED STEEL METEL.
