Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Automative
> Refurbished
> Siemems simatic ET200B 6ES7133-0BN01-0XB0 + terminal
Siemems simatic ET200B 6ES7133-0BN01-0XB0 + terminal
TB4M/DC 6ES7 193-0CE30-0XA0 32 channels, spring-latching terminals with 4th terminal tier for extra ground connections
Available as a Spare Part Only - subject to availability - SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 24DI 24V DC, 8DO 24V DC, 0.5A
Yes; L1+, L5+; value at t < 0.5 s: 35 V
permissible range, lower limit (DC)
permissible range, upper limit (DC)
0.05 A s; with starting current inrush
Current consumption/ power loss
TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC
Bus protocol/transmission protocol
Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Input delay (for rated value of input voltage)
Short-circuit protection of the output
Limitation of inductive shutdown voltage to
for signal "1" permissible range for 0 to 60 C, min.
for signal "0" residual current, max.
Output delay with resistive load
Aggregate current of outputs (per group)
permissible quiescent current (2-wire BEROS), max.
Interrupts/diagnostics/status information
Status indicator digital output (green)
Status indicator digital input (green)
between electronic block and PROFIBUS DP
Galvanic isolation digital inputs
Galvanic isolation digital outputs
60 C; 40 C for other mountings
95 %; RH class 2 in accordance with IEC 1131-2
Operation, checked according to IEC 60068-2-6
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
checked according to IEC 60068-2-27
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
