Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> Used
> Wiltron - anritsu dc-40 ghz 2.9MM (k) semi rigid cables
Wiltron - anritsu dc-40 ghz 2.9MM (k) semi rigid cables
Wiltron - Anritsu Pre-Made K / 2.9mm Semi Rigid Cables
* Wiltron K120 - (approximate length)
* Length: 7 cm or 2.75 inches end-to-end
* Catalog data shown below for reference:
* Frequency Range: DC - 40 GHz
* Connectors: 2.92mm / K precision air dielectric
* Cosmetics: Some cables have Wiltron labels and some don't. The labels just stick on and weren't intended to last long.
General Condition and Performance:
* Passive Microwave electrical component performance is mostly based on internal mechanical component interaction.
* Mechanically undamaged components will normally operate properly.
* Microwave electrical testing is limited to equipment on hand and is commonly done only at one in-band frequency or not at all, per description. If no information is provided, assume no testing was performed.
* DC-200MHz tests depend on equipment I have available and is only performed as described.
* Some reduction in performance might be expected with wear/tear and age on connectors or mating surfaces.
* I will answer any questions to the best of my ability.
* Items are As-Pictured, As Described, **Sales are Final**.
* I will not sell any item that tests bad or I believe is defective, without clearly stating defects in description.
