Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> Used
> Fluke 9500 /1100 w 6530 head 1.1 ghz scope calibrator
Fluke 9500 /1100 w 6530 head 1.1 ghz scope calibrator
Fluke 9500 /1100 w 6530 Head 1.1 GHz Scope Calibrator
Recent Fluke calibration certificate, Cal'd April 2010 - April 2011
* 9500/1100 1.1 GHz High-Performance Oscilloscope Calibration Workstation
1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Positive, negative or symmetrical about ground
Fast-Edge (only available on 9530 Active Heads)
70ps Fast-Edge (only available on 9560 Active Heads)
25ps Fast-Edge (only available on 9550 Active Heads)
Square/Sine, Pulse or Narrow Triangle
1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous for period of all waveshapes
Every 10th marker can be set to higher amplitude for periods 1 s for all waveshapes
9500B/2200+9560 0.1Hz to 6.4 GHz
Amplitude (Leveled Sine into 50 )
Flatness (Leveled Sine relative to 50kHz)
Resistance Measurement (not available on 9550)
Capacitance Measurement (not available on 9550 or 9560 heads)
625-line 50 Hz or 525-line 60 Hz
f (up to 120 MHz), f/10 or f/100
1 MHz to 20 MHz in 1 MHz steps
95V to 132V rms or 209V to 264V rms
