Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> Refurbished
> Plus Warranty
> Aluminum compression power cable lug / connector 1/0
Aluminum compression power cable lug / connector 1/0
Total (1) Compression Lug for connecting 1/0 gauge power cable to a bus bar, ground bar or anything else.
Aluminum, Tin Plated, Two Hole Lug made by Western Electric for connecting stranded 1/0 gauge power cable or ground lead to a bus bar or anything else. The lug is engraved with Western Electric part number KS-15977 L73 and can be crimped using any compression tool that uses upper die #13473 and lower die #13476 Yellow or any compression tool using die codes L212, or WE075, or UR4205WE, or any compatible die that crimps 1/0 or 2/0 gauges aluminum connectors. It is about 3 inches long and the tongue has Two holes 3/8 inch in diameter and are 1 inch apart, measured from center to center. The tongue is 1 inch wide.
You will get 1 lug/connector. The lug/connector is in very good condition and have never been used.
