Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> Refurbished
> Lot 5 dual microswitch micro switches w bracket 3A 250V
Lot 5 dual microswitch micro switches w bracket 3A 250V
This batch of switch assemblies was purchased at an industrial liquidation last year, and we do not know much else about them. They were brand new in the original factory boxes until we rebagged them for resale. They require only a very light actuation force; about 1/2 ounce according to our scales. A 4-wire harness is soldered to the switch terminals, along with what appears to be a resistor of some kind. It may be designed as a delay, so some action will occur shortly / immediately after something else is activated. We're not sure what all of that does, but it can be desoldered if it does not fit your application. The two tiny Phillips head screws can also be removed from the mounting bracket to yield two individual 4062T lever switches. The bracket is made of steel with a chromate finish, and it is fairly thick and strong. The switch levers are stainless, although they lightly attracted to a very strong magnet.
(9 to 13) lots: Three pounds
(14 to 18) lots: Four pounds
(19 to 23) lots: Five pounds
