Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> New
> No Warranty
> New harvey mdt hydroclave mc-8 dual voltage autoclave
New harvey mdt hydroclave mc-8 dual voltage autoclave
New Harvey MDT Hydroclave MC-8 Dual voltage autoclave
NEW BARNSTEAD HARVEY HYDROCLAVE MC-8
ONE NEW BARNSTEAD THERMOLYNE MDT HARVEY HYDROCLAVE AUTOCLAVE STERILIZER
This one is dual voltage 115-230 volts
I have the data log, let me know if you want it, the cost is an extra $200
Easy to use. Just plug in the unit, pour distilled water into the reservoir, and push one button to cycle the unit from start to finish. Time/temperature interlock ensures that chamber conditions are correct before the cycle begins.
Drying starts automatically when the cycle is completed. Unwrapped loads dry even with the door closed, for maximum protection against airborne contaminants. For full and wrapped loads, the most efficient drying can be achieved with the door open. Programmability with touchpad microprocessor control and LED display. Touch a button for the type of load cycle: Unwrapped instruments, wrapped instruments, packs, or liquids. Default settings can easily be changed with the touch of a button. Program drying cycles on or off and choose between Laboratory or Medical mode. Laboratory mode allows you to set any temperature and any time; Medical mode allows you to set any time and a higher (but not lower) temperature.
Two models have built-in dataloggers that record sterilizer time, temperature and pressure, then prints a hard-copy record. Other models will accommodate an external datalogger.
Cleaning takes minutes, not hours. The removable cover makes it easy to see when the reservoir needs to be cleaned, and there's no need for expensive solutions or time-consuming backflushing. ASME coded chamber, ETL, UL certified. 120V, 50/60 Hz, 12 amps.
Sellers name A. Bateman 6526 Tyne Ave Cincinnati OH 45213 (***) 498 6502 Email ****@aol.com
