Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> New
> No Warranty
> Cooke corp. tp-125MK-iii automatic fiber optic cleaner
Cooke corp. tp-125MK-iii automatic fiber optic cleaner
COOKE CORP. TP-125MK-III AUTOMATIC FIBER OPTIC CLEANER
Designed especially for use in production facilities, the Model TP-125MK-III automatic fiber optic cleaner, cleans a single fiber end fast, repeatedly and without static residue in less than 3 seconds. What has previously taken minutes for an operator, can now be done in a much shorter period of time. After first mechanically removing the primary coatings, the operator inserts the fiber into the Model TP-125MK-III and simply pulls it out. The result is always a perfectly clean cladding surface, completely free of debris. The fiber is then ready for immediate use in either a connector, sensor, fiber optic source, or metalization chamber. The Model TP-125MK-III is most cost effective in production facilities where a large number of prepared fibers are required.
* Fast operation in less than 3 seconds
* No cracks or damage to the fiber
* Fiber optic sensor mounting
* Fiber optic coupler manufacturing
* Fiber optic device manufacturing
Before and After Cleaning Results
Cleaning and Polishing the Fiber
* Strip the jacket mechanically or by other means.
* Step 2 - Insert and Remove
* Insert the end of the fiber into the nozzle and remove (this step takes a maximum of 3 seconds).
* The fiber is now ready to be mounted on the relevant device or for further processing.