Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Electrical
> Used
> No Warranty
> Charmilles roboform 20 4-axis cnc ram type edm, 1995
Charmilles roboform 20 4-axis cnc ram type edm, 1995
CHARMILLES ROBOFORM 20 4-AXIS CNC RAM TYPE EDM, 1995
CHARMILLES 4-AXIS CNC RAM TYPE EDM
MODEL: ROBOFORM 20 S/N: 210201 NEW: 1995
X AXIS .............................. 11.8"
Y AXIS .............................. 9.8"
Z AXIS .............................. 9.8"
WORKTABLE ........................... 15.7" x 11.8"
MAX. DISTANCE FROM TABLE SURFACE SPINDLE NOSE
USING MECATOOL TOOLING:............ 15.6"
MAX. WEIGHT OF ELECTRODES:........... 55 Lbs.
C-AXIS MOVEMENT ..................... 360 Degrees
ROTARY SHAFT SPEED .................. 20 RPM
MAX. MANUAL SPEED ................... 15mm/s
WORKTANK EFFECTIVE DIMS. ............ 23.8" x 15.7" x 7.2"H
MAX. WORKPIECE WEIGHT ............... 440 LBS.
MINIMUM COMMAND UNIT ................ 0.00004"
RESEVOIR DIMENSIONS .............. 38.5" x 29.6" x 20.9"H
DIELECTRIC FLUID RES. ............ 200 LITERS
FILTERING PRECISION .............. 3 CARTRIDGES
MACHINE TOOL DIMS:................ 50" L-R, 47" D X 93"H
APPROX. MACHINE WEIGHT ........... 1,870 LBS.
CNC CONTROL CABINET DIMS:......... 26" x 24" x 76"H
CHARMILLES CNC CONTROL & POWER SUPPLY
4-STATION AUTOMATIC TOOL CHANGER MOUNTED ON RIGHT SIDE
THIS MACHINE WAS MADE IN THE USA. THERE IS NO DUTY
OR TARIFFS TO BRING THIS MACHINE INTO CANADA OR MEXICO,
THIS MACHINE WAS RUN & TEST CUT BY CHARMILLES SERVICE TECH -
WE WILL FAX YOU THE SERVICE REPORT.
Click Here For More Charmilles Machines
