Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Electrical
> New
> Plus Warranty
> Tap grinder edward blake #2
Tap grinder edward blake #2
. Edward Blake Co., Newton Ctr. Mass., Tap Grinder, No.2, 115V, 60 Hz, 3450 RPM, 4.6 Amp. Installed are (2) 6" grinding wheels, one made by Edward Blake, wheel #801. It is mounted on a base with ways and can move back/forward. The ways on the grinder are 10" long and are adjustable for tightness. The base on one side has a 3/8" mounting hole and on the opposite side it is graded 0 deg to 90 deg. Grinder runs good and smooth. There is no play in the ways and the wheels are still very good. Dimensions (grinder only)- 12" wide x 7" deep x 9" high. The adjusting screw extends 12" forward. The base approximately 11"from the mounting hole to the edge of the grading and is 5/8" thick. For questions please send email to: ****@warwick.net
