Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Electrical
> New
> New mio roof rigger mrr-26 midi 2X6 in crate
New mio roof rigger mrr-26 midi 2X6 in crate
This must be picked up at zip code 14727.
This is a new rigger still in the crate. It must be put tgether. When I opened the crate the other day I noticed slight rust on some of the parts that were not wrapped in plastic. I can send pictures if you would like to see. The picture I have here is from the web as the one I have is unassembed. I do have the manual and directions. I bought this anticipating a roof/window job but never needed it. Please email me with any questions. The info below is from the web... The only thing different from the picture is my weights are black not yellow.
MIO MMR-250A 2x6 'Midi' Has a 2-foot outreach, weighs 150 lbs. and uses 336 lbs. of counterweight. Length from front to rear wheels is 6 feet. 55-inch parapet wall clearance at the shoulder. Unit has 4 x 13-inch rubber pneumatic wheels.
Tested Static Load (lb.)(CAL OSHA)
Locking breaks - front and rear wheels (in.)
Forged eyebolts for tie-back diam.(in.)
Distance from roof to anchor point (in.)
Inside parapet wall clearance at
