Kenosha Reuse Discussion Board   >   RACINE, WI   >   Commercial   >   Automative   >   Used   >   Plus Warranty   >   Fiberglass tape 12OZ x 6" biax 45/45 ( 50 yards )

Fiberglass tape 12OZ x 6" biax 45/45 ( 50 yards )


This is a (50 yard) roll of 12ounce x 6" inch wide Knitted Double Bias (+45/-45 Degree ) fiberglass tape. FYI - Narrow width Fiberglass is commonly known as Tape. This is a very conformable fiberglass cloth and you would use it where equal strength and stiffness in both directions is required. It has good wet and provides a smooth laminate with minimal shrinkage. With its flat non-crimped fibers it yields reduced print-thru and higher stiffness than regular woven fabrics. Biaxial tape is ideal for repairs, tabbing, fillets, seaming and reinforcing. It is extremely conformable, offering fast wet out, high strength and is ideal for hand lay up. It's ideal for use in making structural fillets of major hull seams and structural bulkheads. Because of the way it's made (knitted +45/-45 degree) lays down especially nice in corners, bulk heads and stringers. Each roll is 50 yards long at 6" inches wide. Use with Epoxy resin or Polyester based resin systems. If you have any questions Call Infinity FRP Supply (***)-992-2331 Item:



Fiberglass tape 12OZ x 6