Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Automative
> Used
> No Warranty
> Baldor osseo pm motor & tach & resolver cnc
Baldor osseo pm motor & tach & resolver cnc
Baldor Permanent Magnet Motor with Transducer and Tach Output. Baldor/Osseo Permanent Magnet motor- Part# M-4070-FL-3B, Serial# 8928, Torque Stall 500 0z-in, Max Volts 100DC, Current Cont. 10.0 Amps, No Load Speed 2500 RPM, Max Pulse Current 35.0 Amps, Volt Const. Kv. 40 V/KRPM. Shaft is 5/8 keyed, 2.5 long. Track wheel/pulley is marked 24-1-075, 1210, 5/8 , 3 1/8 diameter (outer rim) x 3/4 wide. Track wheel can be removed and replaced. Baldor/Osseo Transducer & Tach- Part# MTR-4070-FL-3B, Serial# 8928, Transducer Resolver 1:1, Tach Output 7.0 V/KRPM. In the back is male 11 pin connector. Female connector with 24 of wire included. End of connector is for 1/2 flexible metal conduit which I removed. Unit is 11.5 long (excluding shaft) x 3.75 diameter. In the front the mounting flange has 4 mounting holes 3.5 c/c. Unit is in good working condition. For questions please send email to: ****@warwick.net
