Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Automative
> Used
> 3M CA2000R-T3V1 automatic corner labeler applicator
3M CA2000R-T3V1 automatic corner labeler applicator
3M CA2000R-T3V1 Automatic Corner Labeler Applicator
This is a used 3M 1 Corner Label Applicator, model number CA2000R-T3V. This item is in good cosmetic condition. There are scrapes, scratches and dings associated with normal use.
Testing: The unit was connected to 120v AC and powered on. We do not have the correct labels. We tried a few different kinds of labels to see if we could get it to print, but the label applicator would not print. The PLC inside the control panel illuminates sensor #7 is out (See last photo). No further testing or troubleshooting was done. Please look at the photos carefully and let us know of any questions or concerns.
3M CA2000R-T3V Features and Specifications:
* Sato M-8485Se3M Print Engine
* Allen-Bradley MicroLogix 1000 Programmable Logic Controller
* Omron S82K-10024 24VDC Power Supply
* Dimensions:58 L x 28 W x 48 H
* Electrical: 115VAC, 60Hz or 240VAC, 50Hz
* Pneumatic: 75-145PSIG [4.8-10.3BAR] main air supply
* Vacuum: 14-16 H2O [3483-3981PA SCFM: .64
The photos are of the actual item you will receive. Only items shown in the photos are included. No additional accessories are included.
