Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Automative
> New
> Plus Warranty
> Trend 2/2 x 1/4 3.2MM tct single flute cutter
Trend 2/2 x 1/4 3.2MM tct single flute cutter
TRE2214TC : 2/2 x 1/4 3.2mm TCT Single Flute Cutter
These cutters are suitable for grooving, rebating, mortising & drilling, the single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.
The depth of cut on cutters of 2.0 mm diameter and below should be a maximum of 1.0 mm per pass.
Single flute cutters must not be used in eccentric chucks.
