Kenosha Reuse Discussion Board   >   NORTH CHICAGO,IL   >   Commercial   >   Mechanical   >   New   >   Geckodrive G540 4 axis step motor driver & 48V dc p.s.

Geckodrive G540 4 axis step motor driver & 48V dc p.s.


Here is what Marris owner of geckodrives said,"Posted by: "Mariss Freimanis" mariss92705
The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 connectors. It contains four of our G250 drives, our own breakout board and a hard anodized aluminum case.
- Four 10-Microstep motor drives
- 0 to 3.5A rated phase current
- 18VDC to 50VDC supply voltage
- Mid-band resonance compensation
- Auto standby current (70% current)
- Optoisolation on all LPT signal pins
- Two 1A at 0 to 50VDC rated outputs
- Four SPST to GND inputs (TTL)
- FAULT indicator LED,signal to PC
- I-SET resistor on motor connector
- TRIM adjust for motor smoothness
- Panel mount (5.7 by2.4 hole dim.)
- No heatsink needed below 40C ambient
- Easy to service, removable drives
- Modular PCB design with no internal wires
- 10kHz watchdog timer (charge pump)
- Optoisolated analog output for a VFD drive
- Conservative ratings, premium components
- Comes with four backshells and four DB9 solder cup connectors



Geckodrive G540 4 axis step motor driver & 48V dc p.s. Geckodrive G540 4 axis step motor driver & 48V dc p.s.