Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Electrical
> Used
> Plus Warranty
> Agilent N3900A otdr N3914AL sm fiber 43/41/39 db 1625
Agilent N3900A otdr N3914AL sm fiber 43/41/39 db 1625
* Agilent N3914AL Singlemode Module
* Option 21: Connector with Straight Physical Contact
* EXFO FLS-235B Pocket VFL with Case
* Agilent OTDR Traceviewer III
Agilent N3900A Modular Network Tester OTDR MainFrame With N3914AL Singlemode 1310nm, 1550nm & 1625nm Long Haul OTDR Module
1310nm/1550nm/1625nm : 43dB/41dB/39dB
Option 21: Connector with Straight Physical Contact
Includes EXFO FLS-235B Pocket VFL, Full Accessories & Carrying Case With Strap!
Ergonomic design The Modular Network Tester feels like an extension to your arm. It has a hand strap, an ergo grip, and a shoulder strap to work with you and keep your hands free. Attaching a fiber optic connector to a test engine has never been so safe and fast. The pop-up connector can be raised for connection and cleaning purposes and sits securely in the down position, protected by a dust cover while in transit.
* Rugged lightwight and ergonomic design.
* Large, brilliant 10.4" color display, with touch screen functionality and cursor control.
* USB & LAN ports for connectivity to your PC
* Secure and rugged data storage
* One day battery operating time
Internal Memory: 170 MB available memory
3.5 floppy disk drive: for high density, 720/1440 KB floppy disks. MS-DOS format compatible.
One Type III or two Type II PC Card slots
SVGA-LCD: 25.9 cm (10.4 ) color TFT display
Universal Serial Bus (USB 1.1): for connection with USB Video Microscope Camera N3988A
USB 1.1 Peripheral: Transmission for up to 12 Mbit/s
RS232C: 9-pin, maximum baud rate 115200 baud.
Parallel Port: 25-pin, standard parallel port (Centronics)
LAN: RJ-45 jack, (Ethernet 10/100)
Keyboard: PS/2 port (Mini-DIN) for English Standard, PS/2 or AT keyboard
VGA: Analog monitor output with SVGA resolution, 60 Hzb
Headset: Standard microphone and speaker plugc
Operating temperature: 0 C to +50 C
Storage temperature: -20 C to +60 C (without battery)
Humidity: 95% Relative humidity from 0 C to +40 C
Dimensions: 230 mm H, 330 mm W, 61 mm D (9.0 x 13 x 2.4 )
Weight: net 3.3 kg (7.5 lbs), including battery pack.
AC: 100 240 Vrms 10% 50 60 Hz.
Battery operating time: typically 5 hours continuous measurements with standard OTDR test engine at 50% backlight setting.
Charging Time: < 3 hours non-operating
Battery deep discharge protection: provided
The Agilent OTDR Module N3914AL works together with the Agilent Modular Network Tester, and are easy to snap on. The OTDR application is uploaded in seconds due to the dynamic software architecture, and allows plug and play operation. Each OTDR test engine has built-in RISC processing power for fast and accurate trace acquisition and data processing. These test engines work in parallel processing mode with other connected test engines, for example, the 1x12 Switch module. All OTDR modules can be shared between multiple users, without the need for any software changes.
* All Done. All Right. After the measurements have been taken the Pass/Fail Test will automatically check for attenuation and insertion and return loss. The new Bending Test will locate both macro and micro bends.
* Easy Connector access and protection. The pop-up connector solves many common problems. For easy access to the optical fiber connection, the pop-up connector is released to the up position, where a fiber can be attached without any obstacles, or the connector cleaned. This also minimizes the risk of scratches to the connector. In the down position with the dust cover closed, the connector stays protected and clean during transit.
* Attach the right connector. Agilent's universal connector interface allows a large range of standard fiber optic connectors, such as FC/PC, SC, and LC, to be connected to the OTDR port. The connector interfaces are easy to attach, even when working on site, and once removed, the fiber ferrule is easily accessible for cleaning.
