Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Electrical
> Hp 8753B/85047A 6 ghz network analyzer w/opt 6 &10 wcal
Hp 8753B/85047A 6 ghz network analyzer w/opt 6 &10 wcal
This sale is for a very nice Lightly Used HP/Agilent 8753B Network Analyzer with options 006 & 010, matched
with the HP Agilent 85047A S-Parameter test set. Package includes front and rear interconnect cables.
System was just calibrated by an ISO9001 Cal Lab and includes certs. CRT is Bright and Sharp.
This is a really nice system with the 2 most sought after options for this model.
The Agilent 8753B provides excellent RF network measurements for the lab and production test areas. The integrated
synthesized source provides 100 mW of output power, 1 Hz frequency resolution, and linear, log, list, power, and CW
sweep types. Three tuned, 300 kHz to 3 GHz receivers allow versatile independent power measurements or simultaneous
ratio measurements over a 100 dB dynamic range. The instrument has a 0.0-5 dB dynamic accuracy over a 40 dB range.
It can also be used for swept harmonic measurements and time domain analysis.
* Integrated 1 Hz resolution Synthesized Source
* Direct save/recall to an external disc drive
* Execute Complex test procedures with the test sequence function
* Group Delay and deviation from linear phase
* 0.001 dB, 0.01 deg, 0.01 nanosec marker resolution
* Built-in accuracy enhancement
Option 006 = 6GHz Receiver Option
Option 010 = Time Domain Capability
CLICK HERE for 8753B Data Sheet
The Agilent 85047A Test Set provides the capability to measure transmission and reflection characteristics
(including S-parameters) of two-port devices in either direction with a single connection. The test set is controlled from the
analyzer and includes programmable step attenuators. It includes a frequency doubler that can be switched in to measure
3 MHz to 6 GHz in a single sweep or switched out to measure 300 kHz to 3 GHz in a single sweep.
The Agilent 8753B/C/D/E/ES network analyzers and selected 8702 lightwave component analyzer configurations control
the frequency doubler. (The 8753D/E/ES and selected 8702 configurations with built-in 6 GHz source do not use the frequency doubler.)
Option 006 (6 GHz receiver) is required to activate the 85047A.
* Frequency Range: 300 kHz - 6 GHz
* Measures reflection and transmission characteristics of two-port devices in either direction with a single connection.
* Includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep
* Full frequency range of 300 kHz to 6 GHz is available for 8753B/C/D/E/ES
* Exhibits <5 dB insertion loss between the RF input and the test ports
CLICK HERE for 85047A Data Sheet
