Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Automative
> Used
> Zenex zenalube dry ptfe lubricant and release agent 12
Zenex zenalube dry ptfe lubricant and release agent 12
Zenex ZenaLube Dry PTFE Lubricant and Release Agent
Lubricates metal, wood, glass, paper
Temperature range works from 0 F to 450 F
High grade multiple use lubricant and release agent that has excellent microscopic film forming properties. Resistant to most elements and will not wash off. Reduces friction. Contains no silicones or petroleum oil that can collect dirt and dust. Specially made for lubricating items that require a clean dry substance to reduce friction at medium to low load resistance.
For use on metal, plastic and wood. Lubricates locks, hinges, equipment linkages, pulleys, bearings, slide mechanisms, gear drives, chain drives, windows, etc. Also recommended as a mold release agent for injection molding applications.
Shake well before using. Clean surface to be treated. Hold from 6 inches and spray a fine thin film on surface. Reapply as needed.
Net Weight: 11 oz (311 g) /Can
Minimum Order: 1 Case (12 Cans)
Check can label and Material Safety Data Sheet for any additional limitations and warnings.
