Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Automative
> Refurbished
> Plus Warranty
> Kaydon reali slim ball bearing KA025AH0 for amat epi
Kaydon reali slim ball bearing KA025AH0 for amat epi
CRBS Slim Type Rotary Cross Roller Bearings
"A Series" in Angular Contact "Type A" Interchange configuration
A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and a greater ball complement. These bearings will accept radial load and single direction thrust and are normally used in conjunction with another bearing of similar construction. I have more of these available if you wish to replace others to match sets for preventative maintenance.
Part No. KA025AH0. The "H" here separates this bearing from the more common KA025AR0 "R" designation and represents a Bearing Separator made of Phenolic Laminate (H) rather than brass or non-metalic composite. (R)
This type of Bearing Separator is used when low torque, lightweight or vacuum impregnation is required.
New in Excellent condition in original sealed packaging and box as pictured. May be returned if not as described.
ABMA-ABEC-1F Precision or better
ABMA standard 26.2 internal geometry
Heated treated rings Rc 60-62 hardened and stress relieved.
Bore 2.5", Outside Diam. 3.0", Land Dia. L1 2.686", Land Dia. L2 2.814", C'Bore Dia. L3 2.869".
Radial Static 960 Lbs, Radial Dyn 380 Lbs, Radial Static 2,780 Lbs, Radial Dyn 1,100 Lbs.
