Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Automative
> Refurbished
> 3 ch rgb multi-function led dim controlller r/f remote
3 ch rgb multi-function led dim controlller r/f remote
3 CH RGB Multi-Function LED DIM Controlller R/F Remote DC5-24V
LD-3600RC multi function LED controller is a universal RGB controller with high performance, adopted the most advanced PWM control technology. It's dedicated to control entire RGB color changes of LED lights with 4 wires (common anode), such as RGB LED module, LED strip, LED tape, LED wall washer, floodlight, LED under water lamp and other LED lights.
V 3.0 is the latest & wonderful version integrated ideas from many clients; it has much more functions than V2.0, more perfect in performance, especially the soft changes in color fades, very perfect & unimpeachable, deserved to be the best RGB controller with best color smooth changes among similar products.
WIRELESS LED RGB CONTROLLER WITH DIMMER
Using the appropriate led controller it is possible to adjust the brightness of the led without any flickering effect. Not all led controllers are capable for led dimming; proper dimming for led lighting (avoiding led colour shift) can only be done by pulse width modulation based controllers.
LT-SYSTEM-3600RC is a full colour multifunctional rgb led controller based on PWM technology and designed to control colour changing combinations of LED strip lighting with 4-pin 3-loop cables (common anode). It can be adjusted through manual buttons or matching remote control device. Also this unit can run as a standalone controller or linked with an rgb amplifier which can unlimitedly expand its capabilities.
* INPUT VOLTAGE: 5 to 24V DC
* MAXIMUM LOAD CURRENT: 6A / Channel (3 channels R, G, B)
* OUTPUT POWER: 1 TO 90W (5V), 1 TO 220W (12v), 1 TO 450W (24V)
* SCENE MODES: 10 RGB modes + static 7 colours mode
* GRAY SCALE: 256 LEVELS (RGB)
* BRIGHTNESS ADJUST: 0 TO 32 LEVELS
* SPEED ADJUSTMENTS: 16 LEVELS
* PROTECTION: OVERLOAD (AUTO)
* OTHER FUNCTIONS: RESTORE OF SETTINGS AFTER POWER OFF/ON/PAUSE
* SCENE STATUS: LED INDICATORS SHOWING THE CONTROLLERS OUTPUT STATUS
* REMOTE CONTROL RANGE: 20 to?100 meters
* DIMENSIONS: L211 X W40 X H30 (mm)
* PACKAGE DIMENSIONS: L220 X W43 X H33 (mm)
To run 10 meters of RGB strip you will need a 5A switching mode power supply, an RGB controller of your choice and the flexible strip. Basic soldering skills to do some simple connections may be necessary!
To control more than 10 meters of RGB strip using just one remote control, for every extra 10 meters a 5A power supply and an RGB led?amplifier is necessary (LD-System-3060 or HL-AH3H10).
HL-AH3H10 (RGB led amplifier) is a low version of an RGB amplifier but in order to get synchronized with the wireless RGB controller (or additional rgb amplifiers) will need an extra cable connecting negative of all power supplies used!
Using LD-SYSTEM-3060 rgb led amplifier, does not require any extra connections.
