Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Commercial
> Automative
> New
> Hp 8569B 22GHZ spectrum analyzer lab quality nmint cond
Hp 8569B 22GHZ spectrum analyzer lab quality nmint cond
NO MORE GUESSING.......because thats exactly what your doing if you dont have a CALIBRATED High Quality Wide Range Spectrum Analyzer on your Bench....... WITH THIS INSTRUMENT YOU WILL KNOW EXACTLY WHAT ENERGY YOUR LOOKING AT........HOW MUCH IS PRESENT...AND WHAT FREQ RANGE ITS IN.......not some wild Guess......... .......I GUARANTEE IF YOUR PASSION IS RF........ YOU NEED ONE !!!
YOUR LOOKING AT A SUPERB WIDE RANGE 8569B RF ANALYZER ... 100 PERCENT TURN KEY.... and....READY FOR WORK........AT THOUSANDS LESS THAN A DEALER WOULD CHARGE FOR A UNIT LIKE THIS.
You GET A BETTER 8569B .......and for LESS .........only from me !!
I GUARANTEE YOUR SATISFACTION.
THIS ONE IS IN NEAR MINT LAB QUALITY CONDITION !!
ONE OF THE NICEST UNITS I HAVE SEEN IN YEARS.........
Since this unit is in LAB QUALITY CONDITION.......And Carefully Serviced....
THIS IS THE BEST WARRANTY YOU WILL FIND ON ANY PRE-OWNED EQUIPMENT.......ANYWHERE !!!
ALSO........I WILL SERVICE THIS UNIT FOR YOU AFTER THE 1 YEAR WARRANTY IS UP IN THE RARE EVENT YOU NEED IT........AT A REASONABLE COST........This is worth is weight in Gold.......knowing who will service it for you quickly and professionally.......Plus I STOCK EVERY PART for these Units!!
THIS EXTENDED WARRANTY IS A ONE TIME OFFER ON THIS 8569B ONLY........if you have been thinking about getting one......NOW IS THE TIME !!
I really mean it when I say this one is absolutly stunning.......looks like new.
RATED FROM 10 Mhz to 22 Ghz for best Accuracy
Will underrange to about 2 Mhz if needed.
I Service and Sell the 8569B for 1 BIG REASON.......!!
THIS 8569B OFFERS YOU...... The Best overall range, performance, and incredible reliability By Far....... for your hard earned money.
THE 8569B IS EASY AND AN ABSOLUTE JOY TO USE.......SINCE YOU HAVE ACTUAL KNOBS with ....Very High Quality Controls.........OPERATION IS SIMPLE AND QUICK!
My Price is going up on these units in the near Future.......so grab one now if you want a nice one.......at this price level. Which still is at least a thousand bucks less than anything thats even close !
A PRO-SERVICED TURN KEY UNIT ......WILL SAVE YOU .....VALUABLE TIME AND MONEY
YOU CAN HAVE THIS ON YOUR BENCH ....WORKING......and ACCURATE.....IN A FEW DAYS.......VASTLY IMPROVING YOUR RF WORK !!
Another good reason is you can see Harmonically related and/or Spurious Signals........of the Device your Testing....which may be many multiples of the Fundamental Frequency your looking at....which requires a Wide Range Analyzer like this one......!
Unless you have 15K to spend.........and can allow 5K for Service at some point..........for a late model portable....... THE 8569B IS BY FAR YOUR BEST BET !!
TRUST ME I KNOW..........I HAVE WORKED ON THEM ALL..........AND THE 8569B is the BEST for your Money.
THE TRICK.....IS GETTING ONE THAT HAS BEEN PROPERLY SERVICED...........!!!!!!!!
I SPEND ABOUT 35 to 40 Hours of bench Labor......plus Parts............on Every single Unit I SELL.......
I AM A TRUE EXPERT ON THE 8569B.......
UNPACK.........and GO TO WORK INSTANTLY.........NO RUNNING AROUND WASTING TIME TRYING TO GET A Untested UNIT REPAIRED.
THIS ANALYZER WAS OVER 30,000.00 new...........Its absolute HP Top quality !
Front Panel Mechanical Controls have been totally serviced....for Silky Smooth Reliable Operation...........!!!!!! You wont find this Attention to every detail .....anywhere else ...but right here !!!!!
10Mhz to 22Ghz (Will Underrange to 2Mhz if needed).
EXTREMELY WELL BUILT HP INSTRUMENT.......over 30,000.00 NEW
BUILT IN 70 DBM ATTENUATOR FULLY TESTED.......100 HZ RESOLUTION BANDWIDTH......LARGE BRIGHT AND SHARP CRT SCREEN !
LOW NOISE MIXER ........VERY SENSITIVE RECEIVER .........SEE SIGNALS as Low as 1 microvolt !
VERY EXPENSIVE HIGH QUALITY YIG TUNED PRE-FILTER .......
YIG PREFILTER .....Filters out unwanted components before they reach the first Mixer for the best possible measurements.
HPIB REMOTE INTERFACE for computer control
My Email is ****@hotmail.com
Or if you prefer to Call Me... (***)-835-5677 Anytime!
I am a Expert......with over 35 years Experience.
Also Included Free ...are.... Power Cord, all 50 ohm SMA Loads for LO out and IF inputs, Rack Handles, All bottom feet, back corners, and Operation Manual...on CD In other words COMPLETE.....READY FOR YOUR APPLICATION ....guaranteed!!!
Calif Residents pay Sales Tax.
73's ...... Ed ......... WB6IVC
YOUR SATISFACTION IS 100 PERCENT GUARANTEED............
The free listing tool. List your items fast and easy and manage your active items. fast and easy and manage your active items.
