Kenosha Reuse Discussion Board > NORTH CHICAGO,IL
> Bird ac 3000 bga dark infrared rework ir reballing V4.5
Bird ac 3000 bga dark infrared rework ir reballing V4.5
BIRD AC 3000 BGA SPECIAL 60mm CHIP INFRARED SYSTEM
WITH DGC SMART DIGITAL CONTROL V4.5
THE PRODUCT IS NEW, I JUST UNPACKED , TEST IT THAT IS WORKING PROPERLY AND PACK IT AGAIN FOR YOU
THIS MACHINE IS ONLY AVAILABLE IN 220V - YOU NEED A PROPER POWER CONVERTER FOR IT -
BIRD ANY CHIP 3000 BGA Station
Rework tray With Preheating Ceramics Plate Auxiliary LightEnglish Manual
This machine due to the areas should be used for ANY CHIP from 25mm to 60mm ( For less than 60mm is needed to use insulation tape around the chip to prevent board burnt or bubbling ) , including laptops and Nvidia , GForce and Other High performance Video Cards. This machine IS recommended for Consoles or big chip repairs, the IR Area will reach most edges of chips.
Also for Direct TV or Sky TV Boxes - For Turbo Car Chargers - For TV Boards - For Mostly House Hold Electronic Boards and Airspace Industry Boards.
DARK INFRARED MEANS NO INFRARED LIGHT - ALSO THE HEAT HERE DOES NOT GET INFLUENCED BY AIR PRESSURE WHICH MEANS THE DIRECT HEAT TRAVELS IN EMPTY SPACE, FOR MORE ACCURACY AND BETTER REPAIRS
This is a brand new, Model BIRD ANY CHIP 3000 soldering/rework station from BETTER Technologies, an entry level desoldering/soldering rework station for surface or hole mount components. With BIRD , you get a temperature controlled rework welder station with all the enhancements including IRDA preheating surface, Infrared centered or dissipated preheating, and Soldering Iron. All controllers are fully digital. 80 mm of Preheating capacities with 65mm Dark Infrared Area and full board support.
ADVANCED: WE HAVE THE SKD 862D++ - IT DOES CHIPS UNTIL 35mm , THE PLATE IS 120 * 120mm the equipment is SOLDERING IRON, HEATING HOT AIR GUN, HEATING PLATE AND INFRARED BEAM. IS MIDDLE CLASS PRICE BUT WONT DO EXTRA BIG CHIPS OR BIG MAIN BOARDS. THE BEAM IS DIRECT AND WITH NO LENSES TO DECREASE OR INCREASE TEMPERATURE. THIS MACHINE DOES YOUR HEATING SOLDERING , LAPTOPS, MEDIUM BOARDS AND ALL THE MINI ONES . IT COMES WITH 3 LENSES OF EXPANSION. THE LENSES IN ANY MACHINE DO ROUTE THE BEAM AND FOCUS IT , DON'T DO INCREASE OR REDUCTION OF TEMPERATURE, ONLY FOCUSING.
EXPERT: WE HAVE THE PUHUI T-862++ ( DO NOT CONFUSE WITH THE LAST ONE ). IT DOES CHIPS UNTIL 35mm, THE PLATE IS 120 * 120mm the equipment is SOLDERING IRON, IRDA HEATING PLATE AND INFRARED BEAM ONLY. IS MIDDLE CLASS PRICE, BUT WILL HAVE LENSES ON THE BOTTOM OF THE BEAM. HAS 3 LENSES FOR FOCUSING 25 / 35 / 45mm CIRCLED AREA ( 10 LESS COVERAGE FOR SQUARED MM). THIS MACHINE DOES YOUR HEATING SOLDERING , LAPTOPS, MEDIUM BOARDS AND ALL THE MINI ONES IS IN THE SAME CLASS PRICE OF THE ADVANCED MACHINE BUT PROVIDES MORE QUALITY FINISHING THAN THE ADVANCED ONE AND THE EXTRA LENSES, BUT DO NOT HAVE HEATING BLAZING HOT AIR GUN.
POWER SOURCE REGULATED OR A VOLTAGE REGULATOR IN YOUR WORK PLACE , PLEASE DO NOT COMPLAIN IF YOU JUST PLUG YOUR MACHINE DIRECTLY TO A POWER PLUG ON YOUR WALL, YOU ARE WARNED ABOUT IT.
