Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Mechanical
> New
> Brown & sharpe 20X40 universal grinder no. 3 w/tooling
Brown & sharpe 20X40 universal grinder no. 3 w/tooling
Brown & Sharpe 20x40 Universal Grinder No. 3 w/Tooling
* Professionally Rebuilt in 1996
* Traverse & plunge cut selection knob
* Table speed knob (0-150 ipm)
* Crossfeed start/stop toggle
* Crossffeed handwheel retraction button
* Headstock running, table running & off toggle
* Plunge feed rate dial (.0125 - .300 ipm)
* Dwell (L/R) dials (0-2.5 sec)
* Traverse crossfeed rate (L/R) dials (.0001-.003 per reversal)
* Lever control, w/headstock & w/headstock & table switch
* Headstock speed dial (25-500 rpm)
* Internal/external grind switch
* Includes headstock, footstock, truing fixtures
* Includes original Operation & Maintenance, Repair Parts & rebuild information, schematics & manuals
* Also includes various tooling & accessories (as shown)
* Power Requirements: 460V (AC) - 12.55A FLC - 60 Hz - 3 PH)
* Distance Between Centers: 40"
* Wheel Capacity: 14" diameter
* Turret Swivel: +/- 90 deg.
* Hole Through Spindle: 1-1/4"
* Spindle Taper: B&S No. 12 (1-3/4")
* Spindle Taper: B&S No. 10
* 5 HP - 208-220/440V - 14.6-14.0/7.0A
* 1/4 HP - 115V - 2.31A - 400/1200 RPM
* Franklin Electric coolant pump motor
* Lubrication tank capacity: 4 gal
* Hydraulic oil tank capacity: 15 gal
* Overall: L 137" x W 69" x H 76"
* Weight: 9,200 lbs (approx)
* Good - working at time of decommission
* Normal wear from previous use in working industrial shop environment
* Regular maintenance performed by previous owner
* Please arrange preview and get directions by clicking "Ask seller a question" above or see Preview Section below
* Pick-up must be completed within 14 days
* We work with several professional hauling companies that can provide quotes and hauling services.
* Insured - Warehousing and storage for paid items until pickup
* Bonding - Licensed and Bonded seller (through International Sureties)
* Fraud or Loss - Paying for this item and never receiving it.
Material Misrepresentation - Paying for and receiving an eligible item that is a different type, make, or model than what was described in the listing, provided the amount of devaluation to the item due to the misrepresentation exceeds $1,500 (see Coverage Limits for further information).
Damaged - Receiving this item with undisclosed damage, provided the cost of necessary repairs exceeds $1,500 (see below).
For undisclosed damage, certain restrictions apply. The cost of repair must exceed $1,500. The program only covers damages which prevent the equipment from functioning, not defects or damage that are cosmetic or are not critical to operation of the equipment.
What is not covered in the Plan:
* Consumables - fluids, batteries, belts, and filters.
* Normal wear and tear (including but not limited to rust, dents, scratches, minor leaks, etc.) or cosmetic damage which does not impair the operability of the item.
Call our contact center free from anywhere in the world.
You can also click "Ask Seller A Question" with email inquiries.
