Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Mechanical
> 4) littelfus metal oxide varistors V271BA60, mov, 275V
4) littelfus metal oxide varistors V271BA60, mov, 275V
* These 4 MOV's are used but in good working condition
* Littelfuse part # V271BA60
* Metal oxide varistors (MOV)
This is the maximum continuous sinusoidal voltage, which may be applied to the MOV. This voltage may be applied at any temperature up to the maximum operating temperature of 85 C.
This is the maximum continuous DC voltage, which may be applied to the device.
This is the maximum rated transient energy, which may be dissipated for a single current pulse at a specified impulse and duration (2 s), with the rated VRMS applied, without causing device failure.
This is the maximum peak current, which may be applied for an 8x20 s impulse, with rated line voltage also applied, without causing greater than 10% shift in nominal voltage.
Peak Pulse Current (ITM) 1xAmps (A)
This is the voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the ImA point and has specified minimum and maximum voltage ratings.
This is the minimum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings.
This is the peak voltage appearing across the MOV when measured at conditions of specified pulse current amplitude and specified waveform (8x20 s).
This is the maximum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings.
