Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Industrial
> Used
> Miller diversion 165 ac/dc tig welder complete 907005
Miller diversion 165 ac/dc tig welder complete 907005
MILLER DIVERSION 165 AC/DC TIG WELDER COMPLETE 907005
BRAND NEW MILLER DIVERSION 165 TIG WELDER 907005( 230V)
* Power source with primary cord (50A, 230 V plug, attached)
* 12.5 ft (3.6 m) LS17 Weldcraft TIG torch with backcap, ceramic gas cup, 3/32 in (2.4 mm) collet and collet body, and 2% ceriated tungsten
* 11 ft (3.4 m) work cable and clamp
* Smith Argon regulator/flow gauge with hose
* TIG Welding for Dummies book
Comes with full 5/3/1 year factory warranty.
CLICK HERE for full spec sheets http:// /pdf/spec_sheets/AD1-5.pdf
* Aluminum Oil Pans& Intake Manifolds
* Aircraft Frames & Components
* Weld Repair on Home Equipment
* DC: 150 A at 16 VDC, 20% Duty Cycle
* AC: 150 A at 16 VAC, 20% Duty Cycle
* Welding project blueprint for a machine cart/cylinder rack
"...I see this as an excellent hobbyist machine for guys like me who want to fix the occasional busted item, do some artwork, and just have fun, yet it still has the uumph to be able to handle serious welding tasks in the hands of the right welder..." - Message Board Member: Big_Eddy
"...The front panel isn't very intimidating for a beginner and the small electrical needs must be great for a small house garage..." - Message Board Member: ESSENTIAL
NEW! Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.
Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).
Portable. Whether it's in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.
HF start for non-contact arc starting that elminates tungsten and material contamination.
Fan-On-Demand improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine.
Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage - for adequate shielding every time without waste and no need for adjustment.
Fully adjustable amperage control from 10-165 amps DC and AC.
NEW! Weldcraft LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage adjustment built into the handle of the torch.
