Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Industrial
> Used
> Bunn cds ultra auger shaft seals, 26780.0000 37593.0000
Bunn cds ultra auger shaft seals, 26780.0000 37593.0000
This is a pair of brand new auger shaft seals for the Bunn CDS-2, CDS-3 or Ultra-2 machine. These may be the most important maintenance item on your machine. These seals go around the auger shaft and seal product from leaking around the auger shaft at the front of the cooling drum and into the auger shaft alley inside the cooling drum. These seals are recommended for replacement every six months. If these seals fail and product leaks into the auger shaft alley, you won't know you have a problem until damage is done. You get two seals with each purchase. These seals are included in the periodic maintenance kits we offer in our store. You get two seals with each purchase.
When installing these seals you should also replace the blue plastic auger shaft bushings that sit directly behind these seals. The auger shaft is removed, the cooling drum is cleaned, the bushings are removed and replaced, then these seals are installed. Be sure to use no lubricant on the outside of the selas, and apply food grade lubricant only to the inside of the seals. The seals must be fully seated into the cooling drum. When properly installed the seals will not move - the auger shaft will rotate inside the seals.
