Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Electrical
> Refurbished
> Plus Warranty
> Tray rack - pass thru - single section - cap. 30"
Tray rack - pass thru - single section - cap. 30"
Tray Rack - Pass Thru - Single Section - Cap. 30"
Tray Rack - Pass Thru - Single Section - Cap. 30
Tray Rack, mobile, end load, single section, pass-thru, 20" W, 62-1/4" H, 23" D, pass-thru, closed sides, w/slides for (18) 15"x20" or (18) 16"x22" trays, slides on 3" centers, riveted aluminum construction
- Material: Special design, natural finish, high strength, extruded aluminum (6063-T6 alloy).
- Construction: Pass-thru design, aircraft-riveted construction throughout.
- Corner Posts: 11/2"x11/2"x1/8" (38x38x3.1mm) angleshaped.
- Top & Bottom: 11/2"x11/2"x1/8" (38x38x3.1mm) angleshaped riveted to four corner posts.
- Casters: Two A5L ? 5" (127mm) ball bearing swivel, selflubricating axle, rubber-wheeled, zinc-plated, bolted to full-length,14-gauge channel bottom frame. Two A5LB ? same as above with wheel brake.
- Slides 3" (76mm) & 5" (127mm) Spacing: .060"x11/4"x11/2" (1.5x32x38mm) bulb-tipped angle, oubleriveted
to posts. RD15N and RD25N ? .080"x11/4"x3" (2.0x32x76mm).
- Slides 11/2" (38mm) Spacing: .060"x1/2"x11/2" (1.5x12.7x38mm) bulb-tipped, extruded channel double-riveted to posts.
Note: Racks 60" (1524mm) and higher have 1/2" (12.7mm) diameter stabilizer rods at center of each end.
LOAD RATINGS: 20 lbs. (9kg) per level, or not to exceed 375 lbs. (170kg) per unit.
Tray Rack, mobile, end load, single section, pass-
