Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Electrical
> Refurbished
> No Warranty
> Millermatic 180 w/autoset / 907312 & spoolmate 100
Millermatic 180 w/autoset / 907312 & spoolmate 100
The Millermatic 180 is perfect for light fabrication, garage/body shops, auto body, and at home. It welds material 24 gauge to 5/16 inch. This all-in-one MIG machine has infinite voltage control with wire feed speed tracking for easy operator control. Runs on 230 Volt input power to go wherever you need to weld!
The Millermatic 180 mig welder with Auto-Set offers all the benefits of the standard Millermatic 180, but adds Auto-Set to eliminate the guesswork. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Simply set the wire diameter, set the material thickness, and go! The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).
When not within the Auto-Set profiles, use the manual mode to set the weld parameters you desire. The parameter door chart lists voltage and wire feed speed settings options.
* NEW! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork!
* 10 ft (3 m), M-10 Miller MIG gun and cable assy.
* Spool of Hobart .030 solid wire
* Miller Spoolmate 100 Series Spoolgun Pkg
Solid Steel: .023 - .030 (0.6 - 0.8 mm)
Stainless: .023 - .030 (0.6 - 0.8 mm)
Flux Cored: .030 - .035(0.8 - 0.9 mm)