Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Dc + pulse converter optocoupled-speed & power control
Dc + pulse converter optocoupled-speed & power control
We are a UK Authorised importer & distributor of these German manufactured electronic modules. They all have everyday practical applications and can be integrated to function with existing systems. Practical solutions to everyday needs.
By connecting this module in series, it is possible to control our power control modules (230 V/AC or 110 V/AC) M012 + M028 (from microcomputers or PCs) with a DC voltage or a pulse width modulation. This module is connected to where the potentiometer would normally connect to on the M012 & M028 modules. Galvanic separation of the control circuit via optocouplers. Control may be done optionally (at 230 V/AC) 1 - 5 V/DC, 3 - 12 V/DC, 6 - 24 V/DC. Or TTL rectangular pulses 5 V/DC, 1 - 10 kHz pulse width 10 - 90 % PWM (Puls width modulation). Regulation is done by changing the pulse width.
All modules are supplied with manufacturers data sheets and full fitting instructions
Click here For Suitable Accessory Add-ons (Our Modules M012 & M028)
110 V/AC or 230 V/AC (is led to the dimmer module via the connections)
The module delivers a control voltage for the potentiometer input of the dimmer modules M12 or M28
The module M150 may either be controlled with control DC voltages of 1 - 5 V/DC or 3 - 12 V/DC or 6 - 24 V/DC. Or with TTL pulses with a pulse width modulation. Frequency between 1 - 10 kHz, impulse voltage approx. 5 V/DC, pulse width 10 - 90 % PWM. The power is adjusted with the pulse width 10 - 90 %.
control input 1 - 5 V/DC > 1,4 k, control input 3 - 12 V/DC > 4.1 k, control input 6 - 24 V/DC > 9,1 k
via an optocoupler between the control inputs and the signal output towards the dimmer module
