Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Automative
> Used
> Abb AL12Z-30-01 24VDC contactor/starter
Abb AL12Z-30-01 24VDC contactor/starter
Hello, and welcome to T.D.C.'s listing for One (1)
ABB 24VDC Coil - 1 N/C Contact - Three Phase 600V 7.5A 10hp Contactor/Starter
This ABB across the line contactor/starter is "new in the box" and includes documentation sheet with the specifications, dimensions, mounting info in the box. This unit is either backplane or din rail mounting compatable.
The increased use of PLCs in industry has induced a reduction of the power needed to control a contactor.
The 2.4 / 3W consumption of AL9 to AL16 and 3.5W of the AL26 to AL40 allows a direct control by all PLC transistor outputs without the use of an interface relay. When operated from a battery, this low consumption gives a greatly increased battery life.
* Low consumption contactors with DC coil
* Control of power circuits from 4kW (AL9) to 18.5kW (AL40) at a voltage up to 690V 50 Hz and 440V DC
* A large utilization flexibility as they can be mounted in non-standard positions
* An insulation voltage of 1000V for the entire range
* Conformity to International standards
* Several cable connexion possible : classic clamp or cage connector, ring tongue terminals
Many applications are possible : all applications controlled by PLC, machines, robots...
click on this link to ABB pdf document for more information, and please view pages 1.6 & 1.7
http://library.abb.com/global/scot/scot209.nsf/veritydisplay/fee8243678a7cbb4852575fa0066b66b/$File/1SXU000023C0202_01_CXL.pdf
We have four (4) of these units for sale, Also... please visit our store to see our other listings.
If you need any further information, pictures or other questions feel free to contact us.
To see more pictures, scroll to the bottom of the listing.
* You MUST contact us and ask for a Return Merchandise Authorization RMA number before returning any merchandise to us. NO returns will be accepted without an RMA number.
* All unauthorized, no reason, etc. returns are subject to 20% restocking fee
* T.D.C or it's employee's will not be held responsible in any way, for any product we have sold, either through misuse, misapplication or otherwise.
Please Note : Michigan residents are subject to a 6% Sales Tax.
New Pulls/OEM - Products are New, usually purchased in Bulk by us. This equipment was disassemble from whole new units for reselling. Products do not come with software or instructions unless indicated. Products are inspected by T.D.C. to ensure it is fully functional.
Refurbished - Products are refurbished by a 3rd part facility, not the original manufacturer. These products may have minor cosmetic blemishes due to normal usage. Products have been tested and generally have never had any defects. Products may or may not come with Manual, Batteries or Back up Disks, unless indicated. T.D.C. ensures these products are cleaned to our highest standards.
Used Pulls - Products are pulled from a whole used unit for reselling, it is purchased by us in Bulk and may have minor scratches and blemishes. These products do not come with Software or Instructions unless otherwise indicated. T.D.C. has inspected this product to ensure it is fully functional.
Guaranteed not to be DOA ( Dead on Arrival) means that we have powered up the item (if applicable) and received a satisfactory response to indicate it is receiving and using power. We also have run through any built in testing process that the item has and received a satisfactory response or positive result. We do not guarantee toner cartridges, ribbons, batteries or any other replaceable or maintenance item in a unit.
Minor flaws. We do not guarantee against scratches, blemishes, or other flaws consistent with a used item that do not hinder the operation of the item.
Canceled Listings. We list on multiple sites and the listing may be cancelled at any time, due to sales elsewhere.
Thanks for visiting, be sure to check out our store for other specials - Be sure to add us to your favorites list
