Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Automative
> Unist continuous (cooling) spray machining operations
Unist continuous (cooling) spray machining operations
Mist cooling is necessary for a variety of reasons. Wherever friction occurs in machining, tool life is cut short and down time for sharpening or replacement is extended. Burning, warping and discoloring of parts also presents a problem. A Uni-Mist system applied at the tool-to-workplace interface will reduce heat build-up and show the benefits of higher productivity and decreased part re-working and down time. Chips are also removed more rapidly by pressure than by flood cooling, so the tool spends less time recutting those chips.
External Spraying is recommended for machining operations using higher tool RPM's or rapid stock feeding. Uni-MIST continuous spray systems are presently employed in all metal working operations including both metal cutting and metalforming.
Some of these operations include:
TURNING SAWING DRILLING SWAGING BROACHING BORING
MILLING GRINDING STAMPING SHEARING FORM ROLLING
Uni-Mist systems are used on all metals, exotic metals, and some plastics.
Sold by Manchester Tank in Manchester, IN. Model 69-5510-6 with 6 GAL Tank. The tank new was $1120 and the Solenoid was $109. The item pictured is new but the box has been opened and is dusty from storage.
