Kenosha Reuse Discussion Board > KENOSHA, WI
> Commercial
> Automative
> New
> Plus Warranty
> 20 meter ham radio dipole antenna w balun - free ship
20 meter ham radio dipole antenna w balun - free ship
Here is a BRAND NEW, Made to Order 20 Meter Dipole WITH Balun and S0-239 on board. I build each Antenna to order, with or without Baluns, but when you get into 40, & 80 Meter Dipoles (Also Warc Bands) Baluns are suggested. There are a number of reasons for Baluns but if you are a Ham and looking at this Dipole then you already know why the need for a Balun. Pricing using a Standard Center Dipole Insulator (Not a Balun) is less. Prices on other Antennas vary per Band.
Each 20 Meter Dipole is normally cut for 14.300 MHz (unless you have a specific frequency you wish me to cut it for - NO extra charge if within the 20 Meter Band) - Even though each Antenna is built to order, some varying in SWR can occur due to outside circumstances and a tuner may be necessary. Each Balun is guaranteed to 2,000 watts pep by the manufacturer (they have had higher power put thru them but I can't guarantee it beyond that limit. Guarantee is limited to the replacement of the Antenna only by the manufacturer) Each Balun also has an eye bolt for hanging as an INVERTED VEE. This antenna will also work on 10, 12, 15, 17, and possibly 40 meters with a Tuner.
I use ONLY 14 Ga. SOLID Copper wire for best conductivity and preferred wire of Ham Operators. The light protective coating on the Solid Antenna Wire is to protect it from the elements.
Suppliers have also Assured me that ALL components are AMERICAN Made! I could build this cheaper by using foreign parts BUT I WON'T!!!
Helping to keep Americans Working!
I also build Dipoles for any Band you wish (from 2 Meters thru 80 Meters) and pricing varies per band.
ALL high power transmitting antennas should be high enough they cannot be reached by hand to avoid any RF burns.
20 Meter Dipole WITHOUT a Balun, using only a Standard Center Insulator $27.95 Email me for more info!!!
